Control
Your High.
Features
Designed to fit industry-standard 510 cartridges. Compatible with most 1.0ml, 0.5ml, and 0.3ml cartridge sizes.
Activate both cartridges and blend them together, or turn off either cartridge and hit them one at a time. You'll notice a range of experiences when adjusting the power settings helping you dial in on what's right for you. The 4 settings include: High (3.5V), Medium (3.2V), Low (2.8V) or off.
The Blend Pen™ sits in stand-by mode and is ready for your next dose. When drawing, there's no need to push any extra buttons.
Time your dose with one-second interval haptic vibrations. Every second you'll feel a pulse to help you measure and time your dose.
Get clogged cartridges flowing again with the preheat setting. Hold down either and you'll activate the preheat setting. Pro tip - you can take the mouthpiece off and draw directly on the clogged cartridge while activating the preheat setting.
Keep your device safe and secure from unintended use with our child lock feature. Simply hold down both buttons for 5 seconds.
Quickly charge your device with our fast-charging universal USB-C power adapter.
Never be surprised by running out of power again! The Blend Pen™ is designed to warn you when the battery is running low with vibrations and flashing lights. Check the battery life by double clicking either button.
FAQ
This is likely because the device is in child lock. To unlock the device, hold down both buttons for 5 seconds (which feels like a long time!). You’ll feel the device vibrate and turn on. The Blend Pen™ will be full functional when cartridges are loaded.
Yes! Simply press the power setting button on the side you don’t want to activate, until there are no white lights.
- If your mouthpiece is dirty, remove the mouthpiece and put it under running water. If you find that there is pocket lint stuck in the hole in the tip of the mouthpiece, clean this by placing your mouth on the bottom of the mouthpiece (the side that usually is place over the cartridges onto the base of the device), and blow air (and water) through the mouthpiece to force any gross lint out.
- You can easily wipe the exterior of the device with an alcohol wipe (or alcohol on a paper towel). Use iso or ethyl alcohol, about 75%
- If the inner mouthpiece seal is clogged and dirty, you can push it out through the outside of the mouthpiece and soak it in alcohol. Remove the silicone seal with tweezers or you can leave it out.
- Use a Q-Tip with iso alcohol on the inside where the cart screws into the device. Sometimes this area gets oil on it and that will make it sticky, so it’s good practice to clean that before putting a new cart in the device
This depends on many factors, namely, temperatures used and how often you use the device:
- If you are running full power on both carts all the time, your battery will drain more quickly.
- If you use the preheat often, this will reduce the battery power.
- If you keep the device at the lowest level of power it will last for quite a while.
Of course, the exact amount of time will depend on usage. For many light users, you'll find the battery can last a few weeks. For heavy users, your battery will last a full day and often times longer. Double click either button to see how much power is left in your Blend Pen™!
1. If the diameter of the cartridge is too big, it won't fit (the BlendPen fits about 90% off all cart’s diameter though, so you should have no problem finding another one).
2. If the cart is too long and the mouthpiece won’t close all the way:
- Remove the silicone piece inside the tip of the mouthpiece (see instructional video for how to do this)
- The Blend Pen™ fits about 80% of the carts on the market when it comes to length. Avoid carts with “duck bill” tips as they tend to be extra long.
- Try finding a shorter cartridge (95%+ of 0.5ml carts fit!)
Yes, even if the cart is short and not touching the end of the mouthpiece, the mouthpiece seals so that you can still use it with various sizes of carts.
Yes, as long as the cartridge is less than 60mm in length, and 11.2mm in diameter (which most cartridges are), the cartridge should fit. There are some different cartridges out there that may not be compatible with the Blend Pen™.
- We added a haptic feedback (a vibration) that tells you when the cart is fully installed.
- Once you feel the vibration you can tighten it SLIGHTLY past that point, but DO NOT OVER TIGHTEN. If you over tighten it might be difficult to unscrew the cart after the device has been used.
This depends on a few factors:
1. Personal Preference
- Cannabinoids activate at different temperatures. High temps may get you 'higher', though it's known that many minor cannabinoids are degraded at high temps.
- High temps can make the oils feel more 'scratchy' in the throat and could make you cough.
- We recommend starting at the low temperature setting and increase as needed.
- Lower temps will preserver the terpenes and allow you to taste the oils better.
2. Conserving Oil
- If you use lower temps this could conserve oil making your carts last longer.
3. Cart Specific
- When you purchase a cart from a store, you can ask the budtender what the ideal temperature is for that cart.
- If they don’t know, you’ll want to do some testing.
4. Multiple Temps
- With our Blend Pen™ you can use different temps on each cart.
- If you’re using a flavor cart with a THC cart, you might want to use a lower temp on the flavor with a middle temp on the THC/CBD cart.
